Due to the unique blade design, Shears must be maintained as outlined
below. Care and maintenance is the key element in achieving maximum performance
from your Hair cutting Shears.

*Please note: Failure to perform proper care and maintenance on a daily basis will
most likely result in a damaged shears and unsatisfactory performance.
Please take the time to carefully read the following information. Maintained properly,
Professional hair shears will perform incredibly well. This information is the result of many
years of study and testing. The methods and techniques are proven, and ensure your
hair shears will perform "like new" for as long as possible.

1. Cleaning:
Using a soft cloth towel, thoroughly wipe your hair shears or pet grooming shears

and  blades after every cut. This will reduce build-up of chemicals and debris, which

may  adversely affect the performance of your professional hair shears throughout your

workday.    At the end of the day make certain your hair cutting shears are thoroughly

dry between the blades.

2. Lubrication:
After cleaning and drying your shears, carefully open to a 90-degree angle.
Put one or two drops of top quality scissors oil provided with your Professional Shears
into the "joint". It assists the cleaning process by washing out dirt and debris from
under the pivot and leaves a wax like coating.  This should be done at least once a
workday.

Why Oil and Clean Daily?
Daily oiling and cleaning will enhance the performance and extend the cutting life of
your professional hair shears. Regular cleaning and lubrication protects against rust and
deterioration from chemical/moisture contact in the salon environment, build-up of
bacteria attracting debris in the interior pivot and blade area, reduces friction from
blade movement, and prolongs sharpness.

3. Adjusting Tension (Balancing):
Adjusting tension is an important part of getting the best results from your hair
shears.  If your shears have a diamond studded dial, it is important not to rub on the
jewels while turning the tension knob. Repeated pressure on the jewels can cause
them to break off.  Rather, turn the dial from the ridged area around the side, not from
the top.  

If the tension is too loose, it will allow your haircutting shears to fold the hair. If it is too
tight, it will cause unnecessary wear and user fatigue. To test for tension, hold the
shears with the tips pointed upward. Lift one handle up so the blade is in a ninety-
degree angle and let the blade fall closed. If the blade falls completely closed the
tension is too loose. Rather, it should close about two thirds of the way.     

4. Storage
When your hair grooming shears are not being used, keep blades in a closed position.
This will reduce the chance of nicking and accidental damage to the blades.
Never use magnets to hold hair shears in storage. This can magnetize the
blades attracting undesirable dust and other particles. How you store your Haircutting

Shears is very important. For adequate protection and
ease of travel, you should store your professional Shears or pet grooming shears. In the

case provided.  They should be secured in one position.  Leather is the material that is

most recommended for storage.

5. Sharpening
Your hair styling shears, if maintained properly, will have a very long lasting edge.
When the time does come for re-sharpening, the process must be done carefully
through a professional sharpening service center that has the facility and experience
to sharpen high quality Japanese style shears.  Please do your research before
allowing your shears to be sharpened by a center.  Warranty will be void if improper
sharpening damages your shears.

6. Do’s and Don’ts:

Do’s:
1. Clean, dry and lubricate your hair cutting shears at the end of each workday.

2. Check your hair cutting shears for adjustment (tension), at least once each day.  

3. Check your hair cutting shears for sharpness at least once each month.

4. Handle your K hair cutting shears with gentle care. Protect the edges from everything
except clean hair.

5. Store and transport your professional shears in the case they came in or in a leather
case/holster.

Don’ts:
1. Don’t use your hair cutting shears when they are nicked from dropping.

2. Don’t store your hair cutting shears when dirty.

3. Don’t "throw" your hair cutting shears in a drawer when not in use.

4. Don’t let your hair cutting shears come into contact with any comb sterilization, perm
or color solution; it may cause corrosion and other damage to your Professional hair shears

or pet grooming shears.